Madrix Nebula DMX control interface

The MADRIX NEBULA connects directly to the LED pixels . This advanced SPI decoder receives control data via Ethernet or USB network and is built to provide excellent picture quality.

SPI converter and direct connection

Direct connection to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency up to 24 MHz is available. Powered via USB or 5V to 24V via a 2-pin screw terminal.

Output quality of 8 universes

Each fixture handles up to 1,360 RGB pixels , ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

Art-Net / ACN Streaming / USB

Network data is converted directly to SPI without the need for an additional interface . Reliably distributes data from any compatible hardware or software controller. Also, simply connect to your MADRIX 5 via USB.

Sync Mode and Daisy-Chain Support

MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and between devices to achieve an optimal LED image without visual interruptions. 2 Ethernet ports allow you to seamlessly connect different devices.

Designed for DIN rails or walls

The non-conductive casing and standardized design for 35 mm DIN rails make mounting quick, easy and safe. 2 additional brackets are provided for optional wall mounting. 9 indicators quickly show the status of the device, with the possibility of turning them off.

Valuable features

The device is ready within seconds after booting. HTP merging is automatically available for two Ethernet sources . Firmware is upgradeable. Device-specific settings can be accessed and changed using the integrated web configuration page.

LEDs supported

APA101 / APA102 / APA104 / APA106 / GS8206 / GS8207 / GS8208 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6024 / MBI6120 / MY9291 / P9883 / SJ1221 / SK6112 / SK680 5 / SK6812 / SK6813 / SK6822 / SK9816 / SK9822 / SK9826 / SM16703 / SM16716 / TLC5973 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS2903 / UCS2904 / UCS512B3 / UCS8904 / UCS9812S / WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing

Madrix Nebula connections

• 2x OUT (via connectable screw terminals)
• 2 RJ45 Ethernet ports
• 1 USB port
• 1 power supply (via connectable screw terminal)

In packaging

• 1x MADRIX NEBULA
• 1x set of screw terminals (2x 4-pin and 1x 2-pin)
• 1 USB 2.0 cable (certified)
• 2 wall mounting brackets
• 1x Technical Manual/Quick Start Guide

Technical Specifications Madrid Nebula

• DC 5V - 24V power supply ; beyond
  A) Pluggable 2-pin screw terminal (12A max.), B) USB 5V, C) Port 1 or 2 powered by LEDs; 6A max. of load per port when power passes through the LEDs
• Power consumption < 1.5 W (300 mA) during normal operation (500 mA max. with fuse)
• Network protocols Art-Net (I, II, 3, 4, including ArtSync), Streaming ACN (sACN / ANSI E1.31)
• Data output 8x 512 CH SPI TTL (Max output per port: 680 RGB LEDs / 512 RGBW LEDs / 2048 LEDs 1ch)
• Supported LEDs APA101 / APA102 / APA104 / APA106 / GS8206 / GS8207 / GS8208 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6024 / MBI6120 / MY9291 / P9883 / SJ1221 / SK6112 / SK6 805 / SK6812 / SK6813 / SK6822 / SK9816 / SK9822 / SK9826 / SM16703 / SM16716 / TLC5973 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS2903 / UCS2904 / UCS512B3 / UCS8904 / UCS9812S / WS 2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing
• Ports 2 ports (via 2 connectable 4-pin screw terminals)
• Ethernet 2x RJ45, Auto MDI-X, daisy-chain support, 10/100 MBit/s (compatible with 1 GBit/s)
• Ethernet switch Lookup table (ALU) for 1024 unicast MAC addresses
• USB PORT 1x port, USB 2.0, type-B female socket
• Management 5 status LEDs (+ 4 network status LEDs)
• Enclosure Non-conductive, V-0 flammability rating (UL94 test method), designed for 35 mm DIN rail or wall mounting
• Dimensions 90mm x 70mm x 46mm (length x width x height)
• Weight 110g | 132 g including screw terminals and wall mounts
• Temperature range
• -10°C to 70°C (operating) | -20°C to 85°C (in storage)
• Relative humidity
• 5 % to 80 %, non-condensing (operation / storage)
• IP degree of protection IP20
• CE, EAC, FCC, RoHS certificates
• Warranty 5-year limited manufacturer's warranty