TF3 24ch Digital Mixer

Yamaha TF3 24ch Digital Mixer

• 25 motorized faders (24 channels + 1 master)
• 48 input mix channels (40 mono + 2 stereo + 2 return)
• 20 Aux buses (8 mono + 6 stereo) + Stereo + Sub
• 8 DCA Groups with Roll-out
• MIC / LINE / TRS combo 16 analog XLR inputs + 2 analog RCA pin stereo line inputs
• 16 XLR analog outputs
• 34 x 34 digital record / playback channels via USB 2.0 + 2 x 2 via a USB storage device
• 8 Effects and 10 GEQs
• 1 expansion slot for NY64-D audio interface card

Internal sampling rate index: 48kHz
Signal Delay: Less than 2.6ms, inserted at OMNI OUT, fs = 48kHz
Motorized 100 mm faders: Resolution = 10-bit, +10 dB to -138 dB, -∞ dB all faders
Total Harmonic Distortion: Less than 0.05% 20Hz-20kHz @ +4dBu into 600Ω, INPUT to OMNI OUT Input Gain = min. (Measured with a -18 dB filter/octave @ 80 kHz)
Frequency Response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @ 1kHz, INPUT to OMNI OUT
Dynamic range: of 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain = min.
Input Hum & Noise Level: Equivalent -128 dBu typ., Input Gain = max. (Measured with an A-Weight filter)
Residual Output Noise: -85 dBu, ST master off (measured with an A-Weight filter)
Crosstalk -100 dB (measured with a -30 dB / octave filter @ 22 kHz), Adjacent INPUT / OMNI OUT channels, Input Gain = min.
Power Requirements: 100-240V 50/60Hz
Power Consumption: 100W
Dimensions: W 716mm
H 225mm
D 599 mm
Net weight: 17.5kg
Accessories: Quick Start Guide, Power Cord, Nuendo Live Rack-Mount Options Kit RK5014, Expansion Board, Footswitch (FC 5)
Temperature range: 0-40°C, Storage temperature: -20-60°C