Omnitronic MPVZ-250.6 power amplifier

6-zone amplifier switchable zones

The Omnitronic MPVZ-250.6 power amplifier for PA systems offers convenient loudspeaker control via 6-zone technology . The six zone outputs feature independent 5-level controls . Ideal for the amplification of 100V speakers, this amplifier also works well with low impedance speakers (4-16 ohms).

As for the microphone inputs, there are two rear , unbalanced 6.3mm jacks and one front combo XLR/6.3mm jack with adjustable priority circuit.

Features power amplifier Omnitronic MPVZ-250.6

• Convenient control of PA speakers via 6-zone technology
• 6 PA zone outputs with separate 5-level level controls
• Main PA output (70V and 100V)
• Output for low impedance speakers (4-16 ohms)
• 2 rear microphone inputs (6.3 mm jack, unbalanced)
• 1 front microphone input (combined XLR/6.3 mm jack, unbalanced) with adjustable priority circuit
• All mic inputs with separate level controls
• 3 line inputs (stereo RCA) with separate level controls
• 1 line out (stereo RCA)
• Chime, switchable
• Treble and bass control for the output signal
• Level display with 7 LEDs
• Master control for the output signal
• Protection circuits with LED indication: over current, short circuit, power on delay
• The device is cooled by a cooling fan
• Rack mount (19") 48.3cm 2U

Technical specifications Omnitronic MPVZ-250.6

• Power supply : 230V AC, 50Hz
• Power Consumption : 500.00W
• Output Power : 250W RMS
• Output current : Max. 2.5A
• Power connection : Fixed power cord with safety plug
• Frequency range : 80 - 16000Hz
• S/N Ratio :
  >75dB Microphone
  >85dB line
• THD : <0.5% at 1kHz
• Cooling : Cooling fan
• Impedance : 4 ohms; 8 ohms; 16 ohms; 100V public address systems
• Zone output : 6 adjustable zones
• Circuit : Class AB
• Controls : Current limitation; short circuit; transient on/off
• Equalizer : Master: 1 x 2 mono tone control bands
• Status LEDs : Power, fault, level meter
• Connections :
  Input: 1 x microphone via 3-pin XLR/6.35 mm (F) combo socket (mount version)
  Input: 2 x microphone via 6.3mm jack (unbalanced)
  Input: 3 x line via stereo RCA 0.3V
  Output: 1 x line via stereo RCA
  Output: Speakers via screw terminal
• Enclosure Design : (19") 48.3cm 2U rack mount
• Dimensions : Width: 48.3 cm
• Depth : 38.5cm
• Height : 8.9cm
• Weight : 11.15kg