Eurolite cable for suspension 1050 Kg

Eurolite cable for suspension of heavy loads up to 1050 Kg

EUROLITE lifting cables comply with the current regulations of the German occupational insurance association, summarized in BGI 810-3:2007-03 Loads on people. The lifting ropes, the security guarantees are built in compliance with the European standards DIN EN 12385-4:2008-06 and DIN 56927:2009-03.
Lifting ropes and safety slings are tested by the LGA, an independent and accredited testing institute. The breaking load certified by the LGA is documented in the test report according to DIN EN 10204, which is required by the German Association of Occupational Insurance.
It is clear that any user can install and secure loads above people with these hoist ropes, a safety obligation in all areas where BGV C1 is required.
Use as a fixture
These ropes are stamped with a WLL describing the maximum load when used for general lifting purposes. For all areas where BGV C1 is required, the correct lifting rope should only be selected by calculating with safety factor 12. According to this calculation, the maximum load of this rope is 450 kg (single stranded).

Eurolite lifting cable characteristics

• 6 x 19 round stranded rope with fiber core
• With two thimbles
• Suitable for installing and securing loads above people
• Complies with DIN EN 12385-4:2008-06 and DIN 56927:2009-03
• Rope with thimble
• LGA tested

Eurolite lifting cable technical specifications

• Maximum load WLL (5 times) : 1050 kg
• Core structure : 6 x 19 FC
• Resistance classification : 1770
• Standards: DIN EN 12385-4:2008-06, DIN 56927:2009-03
• Nominal resistance of the rope : 1770 N/mm²
• Wire surface : Galvanized
• Color: silver
• Temperature range : -40°C - +100°C
• Length: 1m
• Diameter: diameter 1cm
• Weight: 1.30kg
• Length weight : 0.359 kg/m