Novastar VX16S video processor for LedWall

The Novastar VX16S Video Processor is the all-in-one video controller that integrates video processing, video control and LED screen configuration in one unit. Together with Novastar's V-Can video control software, it achieves richer image mosaic effects and easier operation .

The Novastar VX16s led controller supports a variety of video signals, processing capabilities and output of Ultra HD 4K×2K@60Hz images and up to 10,400,000 pixels. With its powerful image processing and sending capabilities, the Nova VX16S video display controller can be widely used in applications such as stage control systems, conferences, events, exhibitions, high-end rental and small-pitch displays.

Features video processor Novastar VX16s

• Load capacity: 10.4 million pixels
• 2x 3G-SDI 1920×1080@60Hz
• 1x HDMI 2.0 3840×2160@60Hz
• 4x SL-DVI 1920×1080@60Hz
• DVI mosaic
• 3 independent layers
• 1x 4K×2K main layer
• 2x 2K×1K PIPs (PIP 1 and PIP 2)
• Adjustable level priority

Technical specifications Novastar VX16s

• Industry standard input connectors
  2x 3G-SDI
  1 HDMI 2.0
  4x SL-DVI
• 16 Ethernet output ports for uploading up to 10,400,000 pixels.
• 3 independent levels
• 1x main layer 4K×2K 2x PIP 2K×1K (PIP 1 and PIP 2)
• Adjustable level priority
• DVI mosaic
• Up to 4 DVI inputs can form an independent input source, the so-called DVI mosaic.
• Decimal frame rate supported
• Supported frame rates: 23.98Hz, 29.97Hz, 47.95Hz, 59.94Hz, 71.93Hz and 119.88Hz.
• 3D
• It supports 3D display effect on LED screen. The output capacity of the device halves after activating the 3D function.
• Custom image scaling
• Three scaling options: pixel by pixel, full screen and custom scaling.
• Image mosaic
• Up to 4 devices can be connected to load a large screen when used in conjunction with the video distributor.
• Simple operation and control of devices via VCan
• Up to 10 presets can be saved for future use.
• EDID management
• Custom EDID and standard EDID supported
• Device backup design
• In backup mode, if the signal is lost or the primary device's Ethernet port fails, the backup device will automatically take over the task.